![]() |
![]() ![]() |
![]() |
![]()
Post
#1
|
|
![]() 猫猫猫 ![]() ![]() ![]() Group: Power Cat Posts: 626 Joined: 2006-12-8 Member No.: 2 ![]() |
Get the software from here:
http://www.argyllcms.com/ You'll also need some type of calibration hardware - I use a DTP94 type device. To Profile The Display 1) Set env. variable: export ARGYLL_IGNORE_XRANDR1_2=yes 2) Profile the display: dispcal -yl -K -t6500 -f1 -k0 -o samsung.icc 3) Install Profile into X11 atom (this survives reboots): dispwin -I samsung.icc Every time you boot 1) Set env. variable: export ARGYLL_IGNORE_XRANDR1_2=yes 2) Load profile into X11: dispwin -L NOTE: You may get strange color casts if you don't do the "export ARGYLL_IGNORE_XRANDR1_2=YES" before running the "dispwin -L" Other Notes dispwin -c (clears profile) dispwin –V samsung.icc (verified profile is loaded) “dispwin -I” installs your profile in an x11 atom. A file is created called .config/color.jcnf And the profile itself is copied to .local/share/color/icc/devices/display/ To verify the X11 atom is loaded - comma after -d is needed: xprop -root | grep ICC | cut -f 1-10 -d, Screen Savers (credit: lt_gustavsen; user from bibblelabs support forum) If you are using gnome-screensaver it will destroy your calibration if you don't stop it before you load the calibration. I think gnome-screensaver remembers the status of the LUT from the time X11 was started. This script: #!/bin/bash #Profile installed once with: #dispwin -I ~/.color/icc/i1.icc gnome-screensaver-command --exit export ARGYLL_IGNORE_XRANDR1_2=yes dispwin -L gnome-screensaver attempts to set up ICC with a screen saver. The script stops gnome-screensaver, loads the calibration and restarts the gnome-screensaver. It's best to just disable the screen saver. The quick way to check if you are affected by this: dispwin -L -V (if OK) gnome-screensaver-command -a dispwin -L -V (if still OK you have solved the problem) |
|
|
![]()
Post
#2
|
|
![]() 猫猫猫 ![]() ![]() ![]() Group: Power Cat Posts: 626 Joined: 2006-12-8 Member No.: 2 ![]() |
![]() ![]() ![]() |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 2024-10-21 07:59 |